Toshiba HV10 - Manual (Page 14)

14
Displaying the on-screen information
1 Press to display the following on-screen
information.
4 ABCD
The information will disappear in 6 seconds.
• Channel or external input mode selected
• Channel skip on/off information
• Label (if set)
• Mono/Stereo/Dual audio status
2 To erase the display instantly, press again.
Selecting stereo/bilingual
Selecting the stereo programmes
1 When a stereo programme is received, d Stereo
appears.
10 ABCD Stereo
2 Press
s to select the stereo/monaural mode.
d Stereo and e Mono appear cyclically on the
screen.
Stereo
Selecting the bilingual programmes
1 When a bilingual programme is received, j Dual
appears.
2 Press
s to select the sound to be heard. The
sound diff ers according to the transmission system:
NICAM or German stereo/bilingual broadcast.
Display
Sound to be heard
NICAM German stereo/
bilingual broadcast
j Dual 1 Sub I sound Main sound
J Dual 2 Sub II sound Sub sound
e Mono Main sound —
NOTE: These settings are not stored in the TV memory.
Selecting the monaural programmes
If sound distortion, interruptions or silence arises in the
low sound volume level, setting the
e Mono 2 mode
will mitigate the problem.
1 When a monaural programme is received, e Mono
appears.
2 Press
s to select a monaural mode that is easy to
hear. e Mono 1 and e Mono 2 appear cyclically to
the screen.
NOTE: On some cases, the reception of stereo/bilingual
broadcasts may not be possible after switching on the
e Mono 2 mode.
Setting the Sleep Timer
The Timer is especially useful if you want the TV to turn
itself off after a selected period of time.
1 Press SLEEP and press C or c (SLEEP) to set the
required Sleep Timer (Turn off the TV).
The timer display will set by 10 minutes, up to 12
hours.
To cancel the Sleep Timer:
Press C or c (SLEEP) until the timers set to 00:00.
CONTROLS AND FEATURES