Toshiba Magnia 3310 - Manual (Page 9)

1. Fix the rail bracket to the front rail.
(1) Use screw holes marked by arrows.
Area for screwing
Screw
(M4x8)
Plain
Washer
(M4)
Spring
washer
(M4)
Nut
(M4)
Screws for installation
Figure 1-7 Parts for fixing the rail bracket (front)
(2) Attach the rail bracket to the front rail and set a screw as shown below.
Reverse the rail, and temporarily fix the screw in the order of plain
washer, spring washer and nut.
Figure 1-8 Attaching the rail bracket
(3) On the right side rail, pull the temporarily fixed rail bracket in the direction
of the arrow (1), press the bracket fully to the direction of the arrow (2)
and fix it tightly with a screwdriver and a wrench.
On the left side rail, pull the temporarily fixed rail bracket in the direction
of the arrow (1), press the bracket fully to the direction of the arrow (3)
and fix it tightly with a screwdriver and a wrench.
(1)
(2)
(3)
Figure 1-9 Fixing the rail bracket
2. Fix the rail bracket to the rear rail temporarily.
(1) Use screw holes marked by arrows temporarily.