beautypg.com

Step 2: installing the rail to the rack – Toshiba Magnia 3310 User Manual

Page 11

background image

Step 2: Installing the rail to the rack

Nut bracket

Plain

Washer

(M5)

Screw

(M5X12)

Figure 1-12 Screws for installation

NOTE

: The right rail differs from the left rail. Do not mistake them when installing

the rail bracket.

1. Set the rail bracket between the rack angle and the nut bracket with the Side

A of the nut bracket outside. Screw them together on the right and left of the
front and rear rack angles respectively.
Fit position of rail bracket’s top and pull out the rail bracket from the rack
angle by 5.0mm and tightly screw them.

5.0mm

Fit position of rail bracket’s top.

Fit position of rail bracket’s top

Rail bracket

1U

Side A (width between the hole edge

and bracket edge is narrow)

Rack angle

Figure 1-13 Installing the rail bracket