When writing or rewriting – Toshiba Satellite Pro L650 User Manual
Page 92
User’s Manual
4-16
Operating Basics
■
CD-RW (Ultra Speed +) media should not be used as data may be lost
or damaged.
■
You should always write from the computer's hard disk drive onto the
CD/DVD - do not try to write from shared devices such as a server or
any other network device.
■
Writing with software other than TOSHIBA Disc Creator has not been
confirmed, therefore operation with other software applications cannot
be guaranteed.
When writing or rewriting
Please observe the following points while you write or rewrite data to CD-R,
CD-RW, DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double
Layer), DVD+RW, DVD-RAM, BD-R, BD-R (Dual Layer), BD-RE or BD-RE
(Dual Layer) media:
■
Always copy data from the hard disk drive to the optical media - do not
use the cut-and-paste function as the original data will be lost if there is
a write error.
■
Do not perform any of the following actions:
■
Change users in the Operating System.
■
Operate the computer for any other function, including such tasks as
using a mouse or Touch Pad, or closing/opening the display panel.
■
Start a communication application.
■
Apply impact or vibration to the computer.
■
Install, remove or connect external devices, including such items as a
SD/SDHC/SDXC memory card, miniSD/microSD Card, Memory
Stick/Memory Stick PRO, MultiMediaCard, USB device, external
monitor, or an optical digital device.
■
Use the audio/video control button to reproduce music or voice.
■
Open the optical disc drive.
■
Do not use shut down, log off, Sleep Mode or Hibernation Mode
functions while writing or rewriting.
■
Make sure that the write/rewrite operation is completed before going
into either Sleep Mode or Hibernation Mode (writing is completed if you
can remove an optical media on the DVD Super Multi drive or BD-
Combo/BD-Writer drive).
■
If the media is of poor quality, or is dirty or damaged, writing or rewriting
errors may occur.
■
Set the computer on a level surface and avoid places subject to
vibration such as airplanes, trains or cars. In addition, do not use the
computer on an unstable surface such as a stand.
■
Keep mobile phones and other wireless communication devices away
from the computer.