Toshiba Equium A80 - Manual (Page 69)

Toshiba A80 3-5
Getting Started
Connecting the AC adaptor
Attach the AC adaptor when you need to charge the battery or you want to
operate from AC power. It is also the fastest way to get started, because the
battery pack will need to be charged before you can operate from battery
power. The AC adaptor can be connected to any power source supplying
from 100 to 240 volts and 50 or 60 hertz. For details on using the AC adaptor
to charge the battery pack, refer to Chapter 6, Power System.
1. Connect the power cord to the AC adaptor.
Connecting the power cord to the AC adaptor
2. Connect the AC adaptor to the DC output plug to the DC IN input port on
the back of the computer.
Connecting the adaptor to the computer
3. Plug the power cord into alive wall outlet. The Battery and DC IN
indicators on the front of the computer should glow.
Use of the wrong adaptor could damage your computer. TOSHIBA assumes
no liability for any damage in such case. The output rating for the computer
is 15 volts DC.