Belkin SURF N 15 N150 - Manual (Page 13)

13
gETTing TO KnOW YOUR ROUTER
a) Router status light
Your router’s status is shown by the light on the front .
Off: the router is not plugged into a power source .
blinking green: the router is starting up .
solid green: the router is connected to the internet .
blinking amber: the router can’t detect the modem . either the
modem is off, is not plugged into the router, or is unresponsive .
b) Wi-Fi protected setup (Wps) light and button
the WPs button on the front of your router can be used to
help establish a secure connection between your router and
other WPs-enabled Wi-Fi devices such as computers . to use
the WPs feature on your router, see “Getting started > adding
computers to Your network > using the WPs Button” .
the small light near the WPs button shows what is happening
while you are using WPs to establish a connection .
Off: idle
blinking green: the router is listening for a
WPs-enabled computer or other device .
solid green: the router has made a secure
connection with the computer or other device .
amber: a connection was not created .
Front panel
(a)
(b)