Pioneer AVH-X8600BT - Manual (Page 7)

< CRD4782-A >7
English
7
Engb
■ Using an AUX input
To video output To audio outputs
External video
component
(sold separately)
This product
Red, white
RCA cables
(sold separately)
Yellow
AUX input
Mini-jack AV cable
(CD-RM10)
(sold separately)
Notes
This mode is available when the setting
of AUX input is set to “On”. (For details,
refer to Operation Manual.)
When connecting an external video com-
ponent using a mini-jack AV cable, use a
separately sold AUX extension cable as
necessary.
CAUTION
Be sure to use a mini-jack AV cable (CD-
RM10) (sold separately) for wiring. If you use
other cables, the wiring position might differ
resulting in disturbed images and sounds.
OK
G V R
L
G R V
L
L : Left audio (White)
R : Right audio (Red)
V : Video (Yellow)
G : Earth
Connecting an HDMI device
HDMI device
(sold separately)
This product
HDMI port
High Speed HDMI ®
Cable
(sold separately)
Notes
For details concerning the operations of
HDMI device, refer to Operation Manual.
When you connect the High Speed
HDMI® Cable, use the lock tie to fix it
securely.
For details, refer to Securing the High
Speed HDMI® Cable on page 6.
Connecting the rear display
To video input To audio inputs
Rear display with
RCA input jacks
(sold separately)
RCA cables
(sold separately)
Mini pin plug cable
(sold separately)
This product
Rear audio
output
Yellow (V OUT)
■ When using a rear display con-
nected to rear video output
WARNING
NEVER install the rear display in a loca-
tion that enables the driver to watch the
video source while driving.
This product’s rear video output is for con-
nection of a display to enable passengers in
the rear seats to watch the video source.
Installation
Precautions before
installation
CAUTION
Never install this product in places
where, or in a manner that:
— Could injure the driver or passengers
if the vehicle stops suddenly.
— May interfere with the driver’s opera-
tion of the vehicle, such as on the
floor in front of the driver’s seat,
or close to the steering wheel or
gearstick.
— To ensure proper installation, be
sure to use the supplied parts in the
manner specified. If any parts are not
supplied with this product, use com-
patible parts in the manner specified
after you have the parts’ compatibil-
ity checked by your dealer. If parts
other than supplied or compatible
ones are used, they may damage
internal parts of this product or they
may work loose and the product may
become detached.
— Do not install this product where it
may (i) obstruct the driver’s vision,
(ii) impair the performance of any of
the vehicle’s operating systems or
safety features, including airbags,
hazard lamp buttons or (iii) impair
the driver’s ability to safely operate
the vehicle.
— Never install this product in front of
or next to the place in the dashboard,
door, or pillar from which one of
your vehicle’s airbags would deploy.
Please refer to your vehicle’s owner’s
manual for reference to the deploy-
ment area of the frontal airbags.
Before installing
Consult with your nearest dealer if instal-
lation requires drilling holes or other
modifications of the vehicle.
Before making a final installation of this
product, temporarily connect the wiring
to confirm that the connections are cor-
rect and the system works properly.
Installing this product
■ Installation notes
Do not install this product in places
subject to high temperatures or humidity,
such as:
Places close to a heater, vent or air
conditioner.