Pioneer CNDV-1100HD - Manual (Page 4)

! Do not lose the supplied Media Number
Card (MEDIA NUMBER CARD). If the
Media Number Card is lost, reissue of the
Media Number (MEDIA NUMBER) is not
possible. Also you must submit the Media
Number Card when repairs are needed.
The card is necessary as proof of authenti-
city if service is required (including re-
covery).
Setting items to be deleted
and initialised
The following settings and items are cleared
or returned to the default settings after up-
grade. (The settings and items not listed below
will be retained.)
Map function
View mode and scale setting on the map, di-
rection of the map
Route setting
Current route and guidance status
[Destination] menu
! The history of “Auto fill-in function” for ci-
ties and streets
! Sorting order selected in [Address Book]
! The settings of [Options]([Route Over-
view])
[Map] menu
All settings
[Settings] menu
[
Volume], [Regional Settings] (except for
[ Language])
[Vehicle Dynamics]
Right and left gauge type, [
Adjust Style]
Others
Learnt data used in [
Learning Route]
The user data stored in the hard disk drive of
the unit may be erased if unexpected error oc-
curs during software installation. Pioneer is
not responsible for any data loss or unavailabil-
ity of user data.
Visit our website
Visit us at the following site:
http://www.pioneer.eu
! Register your product. We will keep the de-
tails of your purchase on file to help you
refer to this information in the event of an
insurance claim such as loss or theft.
! We offer the latest information about
PIONEER CORPORATION on our
website.
10
Engb
Other precautions
Checking the device number
First, check your device number
(DEVICE NUMBER, displayed such as
Device# or Device Number) of your navigation
system for later procedures. To display the de-
vice number, do the following.
1 Turn your navigation system on.
2 Press the MENU button to display the
navigation menu.
Navigation menu appears.
3 Touch the key in the following order in
the navigation menu.
[
Settings] d [Hardware] d [Service Info
Screen]
4 Write down your device number
(Device Number) onto the supplied Media
Number Card (MEDIA NUMBER CARD) to
avoid mistakes.
p Also write down “Version” information
which would be used to confirm completion
of the update.
Getting the password for
authentication
For upgrade, a unique password issued online
is necessary. Access the website with your PC
and get your password.
The following information is required.
! Media Number (MEDIA NUMBER) printed
on supplied Media Number Card
(MEDIA NUMBER CARD)
! Device Number (DEVICE NUMBER) of your
navigation system
1 Access on the following website to
issue your password.
http://www.pioneer-rus.ru/UnlockNavgate
For issuing the password, follow the instruc-
tion on the website.
2 Record the password that you received.
You need to input this password accurately.
Write down your password to avoid mis-
takes.
11
Engb
Preparation for upgrade
This section describes the upgrade proce-
dures for your navigation system.
The update has two phases.
Phase 1: Update the database
In this phase, take notice of the following:
! All functions other than the radio are dis-
abled during update. You can perform sim-
plified operations by using the
TRK (c/d)
button and VOL (b/a) button. (We recom-
mend changing the AV source to “AM” or
“FM” before you start the update.)
! The update takes approximately 1 hours in
total.
! If you turn the ignition switch off (the navi-
gation system turns off) or eject the up-
grade disc, the update resumes when the
navigation system turns on or the disc is re-
inserted.
Phase 2: Update the system
programme
In this phase, take notice of the following:
! No functions are available.
! The update takes approximately 10 min-
utes.
! NEVER stop the engine of your vehicle nor
turn off the power supply to the navigation
system until the installation is completed.
Turning the power off in this phase causes
a malfunction or failure of the navigation
system.
Upgrade procedures
1 Park your vehicle in a safe place.
Leave the engine on, and make sure that the
handbrake is applied.
2 Press the MAP button to display the
current location.
Be sure to display the map of your current po-
sition. Updating cannot start if others screens,
such as scroll mode, navigation menu or AV
screens are displayed.
12
Engb
Instructions for
upgrading