Receiving traffic announcements 16, Responding to the tp alarm 16, Using pty functions 16 – Pioneer DEH-P5630MP User Manual
Page 16: Searching for an rds station by pty, Information 16, Receivingtraffic announcements, Usingpty functions, Respondingto the tp alarm, Searchingfor an rds station by pty information

Receivingtraffic
announcements
TA (traffic announcement standby) lets you re-
ceive traffic announcements automatically, no
matter what source you are listening to. TA
can be activated for both a TP station (a sta-
tion that broadcasts traffic information) or an
enhanced other networks TP station (a station
carrying information which cross-references
TP stations).
1 Tune in a TP or enhanced other net-
works TP station.
When you are tuned into a TP or enhanced
other networks TP station the TP (
) indica-
tor will light.
2 Press TA to turn traffic announcement
standbyon.
Press TA and TA ON appears in the display.
The tuner will standby for traffic announce-
ments.
# To turn traffic announcements standby off,
press TA again.
3 Use VOLUME to adjust the TA volume
when a traffic announcement begins.
Rotate to increase or decrease the volume.
The newly set volume is stored in memory and
recalled for subsequent traffic announce-
ments.
4 Press TA while a traffic announcement
is being received to cancel the announce-
ment.
The tuner returns to the original source but re-
mains in the standby mode until TA is pressed
again.
# You can also cancel the announcement by
pressing SOURCE, BAND, a, b, c or d while a
traffic announcement is being received.
Notes
! You can also turn on or off TA function in the
menu that appears with the pressing of
FUNCTION.
! The system switches back to the original
source following traffic announcement recep-
tion.
! Only TP and enhanced other networks TP sta-
tions are tuned in during seek tuning or BSM
when TA is on.
Respondingto the TP alarm
When a TP or enhanced other networks TP
station is lost due to a weak signal the TP
(
) indicator is extinguished and a series of
short beeps, about five seconds long, sound to
remind you to select another TP or enhanced
other networks TP station.
% When listening to the tuner, tune in an-
other TP or enhanced other networks TP
station.
UsingPTY functions
You can tune in a station by using PTY infor-
mation.
Searchingfor an RDS station by
PTY information
You can search for general types of broadcast-
ing programs, such as those listed on page
1 Press FUNCTION to select program type
selection (PTY).
Press FUNCTION until program type appears
in the display.
RDS
En
16
Section
05