Tuner listening to the radio 11, Listeningto the radio, Tuner – Pioneer DEH-P5630MP User Manual

Page 11

Listeningto the radio

These are the basic steps necessary to operate

the radio. More advanced tuner operation is

explained starting on the next page.

This units AF (alternative frequencies search)

function can be turned on and off. AF should

be off for normal tuning operation (refer to

page 14).

1 Stereo (5) indicator

Shows that the frequency selected is being

broadcast in stereo.

2 Preset number indicator

Shows what preset has been selected.

3 Frequencyindicator

Shows to which frequency the tuner is

tuned.

4 Band indicator

Shows which band the radio is tuned to,

MW, LW or FM.

1 Press SOURCE to select the tuner.

Press SOURCE until you see TUNER dis-

played.

2 Use VOLUME to adjust the sound level.

Rotate to increase or decrease the volume.

3 Press BAND to select a band.

Press BAND until the desired band is dis-

played, F1, F2, F3 for FM or MW/LW.

4 To perform manual tuning, press c or

d with quick presses.

The frequencies move up or down step by

step.

5 To perform seek tuning, press and hold

c or d for about one second and release.

The tuner will scan the frequencies until a

broadcast strong enough for good reception is

found.

# You can cancel seek tuning by pressing either
c or d with a quick press.
# If you press and hold c or d you can skip
broadcasting stations. Seek tuning starts as soon
as you release the buttons.

Note

When the frequency selected is being broadcast
in stereo the stereo (5) indicator will light.

Tuner

English

Section