Bushnell 18-0832 - Manual (Page 12)

Disconnect:
1. Make sure the camera
power is turned off.
2. Remove the video cable.
OPERATION GUIDE - Low Battery Status
1. Press the Power button
2. If the battery capacity goes low,
the battery symbol on the screen
will flash, a warning beep will be
sent out and LED will flash.
3. If the batteries go dead, the battery
symbol will appear on the screen and the
device will send out a warning beep.
Please recharge the battery immediately.
23
OPERATION GUIDE - Play Back on Television
Operating Procedure Picture Description Binocular Action
1. Connect to the TV Make sure that the power of TV
and camera are turned off.
2. Open terminal cover of the device and
connect video cable to AV out port.
3. Connect the other end of video cable
to the video in port on the TV
4. Connect to the AC adaptor While playing images on the TV,
(or battery) the AC adaptor can be powered by
any household power outlet to
support the device.
5. Press the Power button
6. Press the TV power
22