Pioneer SE DIR800C - Manual (Page 13)

02 Getting started
13
En
English
Chapter 2
Getting started
Loading the batteries
1 Press and slide the cover as indicated
to open.
2 Load the batteries, making sure to
put them in the right way around (as
indicated).
3 Slide the battery compartment cover
back on.
About batteries
Use the supplied rechargeable batteries or
size AA/LR6 (R6) dry-cell batteries to power
the headphones. Use batteries of the same
kind.
Replacing batteries
Replace the batteries when the POWER
indicator on the headphones no longer lights
and there is no sound from the headphones.
For the supplied rechargeable batteries, see
Charging the batteries below. If you are using
dry-cell batteries, replace with new ones.
Approximate usage time is as follows:
Supplied rechargeable batteries
(fully-charged): ................ Approx. 16 hours
Size AA/LR6 alkaline batteries:
....................................... Approx. 27 hours
Size AA/R6 manganese batteries:
........................................ Approx. 10 hours
Note
! Usage time may vary according to the
temperature and other conditions.
Charging the batteries
1 Connect the supplied AC power
adaptor to DC IN jack on the transmitter.
Plug the adaptor into the wall outlet.
2 Open the battery compartment on
the top of the transmitter.
3 Insert the supplied rechargeable
batteries making sure to put them in the
right way around (as indicated).