Din rear-mount fixing the front panel, Din rear-mount, Fixing the front panel – Pioneer AVH-P5700DVD User Manual

Page 15

ENG/MASTER 96 INST

English

Español

Deutsch

Français

Italiano

Nederlands

DIN Rear-mount

Installation using the screw holes on
the side of the unit

• Fastening the unit to the factory

radio mounting bracket. (Fig.
17) (Fig. 18) (Fig. 19)

Select a position where the screw holes
of the bracket and the screw holes of
this product become aligned (are fit-
ted), and tighten the screws at 2 places
on each side. Use any of binding
screws (4

× 3 mm), binding screws (5

× 6 mm) or flush surface screws (5 × 6
mm), depending on the shape of the
screw holes in the bracket.

*1 Use binding screws (4

× 3 mm) only.

Fig. 17

• When installing in a shallow space,

use the following screw holes. In
this case, stick conceal tape on parts
that protrude from the dashboard.

Fig. 18

Fig. 19

Fixing the front panel

If you do not operate the removing and
attaching the front panel function, use
the supplied fixing screws to fix the
front panel to this unit.

• Fix the front panel to the unit

using fixing screws after remov-
ing the front panel. (Fig. 20)

Fig. 20

Fixing screw

Screw

Dashboard or
Console

Factory radio mounting
bracket

Conceal tape