Pioneer BDP-51FD - Manual (Page 49)

49
En
06
Changing the terminals for
outputting video and audio
signals (Output Terminal Priority)
Set the video and audio terminals to be used.
1 Select and set Options.
Use / to select, then press ENTER.
2 Select and set Output Terminal Priority  Next Screen.
Use / to select, then press ENTER.
3 Select the terminal for outputting video signals.
Use / to select, then press .
When a digital output is selected for the video output terminal,
Video is fixed at HDMI and cannot be changed.
When an analog output is selected for the video output terminal,
Component Video or S-Video/Video can be selected for Video.
• HDMI – HDMI OUT terminal
• Component Video – COMPONENT VIDEO output terminals
• S-Video/Video – S-VIDEO output terminal or VIDEO output
terminal
The video and audio signals output from the set output terminals are
output synchronously (lip synchronization).
Caution
• If the output terminal you want to select at Video is not
displayed, use the VIDEO SELECT button to switch between
digital and analog output (page 24).
4 Select the terminal for outputting audio signals.
Use / to select, then press ENTER.
• HDMI – HDMI OUT terminal
• Digital Audio – DIGITAL OUT (COAXIAL/OPTICAL) terminal
• Analog Audio – AUDIO OUT (2 ch) terminals or AUDIO OUT
(7.1 ch) terminals
The optimum audio signals for the audio format and the player’s
settings are output from the output terminal(s) set here.
Caution
• When S-Video/Video or Component Video is selected at
Video, no sound will be output if HDMI is selected at Audio (the
warning message shown below is displayed). When listening to
the audio by the HDMI-compatible device, connect to the TV
with the HDMI cable to watch the video (pages 13 and 16).
• Linear PCM (2-channel) audio signals are output from the audio
terminals other than the one set at Audio, regardless of the
audio format and the player’s settings.
Restoring all the settings to the
factory default settings
1 Check that the player’s power is turned on.
2 When a disc is playing, press  to stop playback.
Eject the disc from the player.
3 While pressing , press  STANDBY/ON.
Operate using the buttons on the player’s front panel.
Note
• After restoring all the settings to the factory default settings, use
Setup Navigator to reset the player (page 19).
TOP MENU TOOLS
HOME
MENU RETURN
ENTER
Video Out
Audio Out
Speakers
HDMI
Language
Parental Lock
Options
Setup Navigator
Initial Setup
BD PLAYER
Output Terminal Priority
On Screen Display
Angle/Secondary Indicator
Hybrid Disc Playback
BDMV/BDAV Playback Priority
DivX VOD
Auto Power Off
On
On
On
BD
BDAV
TOP MENU TOOLS
HOME
MENU RETURN
ENTER
Audio
Output Terminal Priority Video Out
Audio Out
Speakers
HDMI
Language
Parental Lock
Options
Setup Navigator
Initial Setup
BD PLAYER
Video
Analog Audio
S-Video/Video
Yes No
Audio is not output from HDMI
terminal when [S-Video/Video] or
[Component Video] is selected.
OK to select this setting?
51FD_WV_EN.book 49 ページ ２００８年８月２６日 火曜日 午前９時５８分