Pioneer DCS-240 - Manual (Page 11)

Listening to your system 02
11
En
English
Français
Deutsch
Nederlands
Italiano
Español
• Press SHIFT+FRONT SURROUND to
switch Front Surround on or off.
When set to MODE ON , make sure to follow
the guidelines in the Setup Guide for best
surround sound.
Listening in stereo
You can listen to any source—stereo or
multichannel—in stereo. When playing a
multichannel source, all channels are
downmixed to the front left/right speakers and
the subwoofer.
• Press SHIFT+SURROUND repeatedly until
STEREO shows in the display.
Listening with headphones
When headphones are connected, only the
STEREO mode is available.
Using the SFC modes
The SFC (Sound Field Control) modes can be
used with any multichannel or stereo source
for a variety of additional surround sound
effects.
1 Press SOUND MODE .
2 Use / (cursor left/right) to select SFC
MODE then press ENTER .
3 Press / (cursor up/down) then ENTER
to select an SFC Sound Mode.
Select between OFF , ACTION , DRAMA ,
ROCK , POP , HALL or LIVE .
Adjusting the bass and treble
Use the bass and treble controls to adjust the
overall tone.
1 Press SOUND MODE .
2 Use / (cursor left/right) to select
BASS or TREBLE then press ENTER .
3 Use / (cursor up/down) to adjust the
sound then press ENTER to confirm .
Boosting the bass level
There are two bass modes you can use to
enhance the bass in a source.
1 Press SOUND MODE .
2 Use / (cursor left/right) to select
BASSMODE then press ENTER .
3 Use / (cursor up/down) to adjust the
sound then press ENTER to confirm .
Select between OFF , MUSIC or CINEMA .
SHIFT
CLEAR SLEEP DISPLAY
SURROUND FRONT
SURROUND
SYSTEM
SETUP
HOME
MENU DVD
MENU
TOP
MENU
RETURN
TEST TONE
SOUND
MODE
ENTER
XV-DV232.book 11 ページ ２００４年１２月２４日 金曜日 午後１時５９分