Usb storage device, Ipod, Operating this unit – Pioneer MVH-350BT User Manual

Page 6

USB storage device

Basic operations

Playing songs on a USB storage device
1 Open the USB port cover.
2 Plug in the USB storage device using a USB

cable.
Playback is performed automatically.

Stopping playback of files on a USB storage de-
vice
1 You may disconnect the USB storage device at

any time.
The unit stops playback.

Selecting a folder
1 Press 1/ or 2/ .

Selecting a track
1 Press c or d.

Fast forwarding or reversing
1 Press and hold c or d.
! When playing compressed audio, there is no

sound during fast forward or reverse.

Returning to root folder
1 Press and hold BAND/ .

Switching between playback memory devices
You can switch between playback memory devices
on USB storage devices with more than one Mass
Storage Device-compatible memory device.
1 Press BAND/ .
! You can switch between up to 32 different

memory devices.

Note

Disconnect USB storage devices from the unit
when not in use.

Switching the display

Selecting the desired text information
1 Press DISP to cycle between the following:

MP3/WMA/WAV
! TRACK INFO (track title/artist name/album

title)

! FILE INFO (file name/folder name)
! ELAPSED TIME (track number and play-

back time)

! CLOCK (source name and clock)
! SPEANA (spectrum analyzer)

Notes

! TRACK INFO and FILE INFO text information

will change automatically.

! Depending on the version of iTunes used to

write MP3 files to media file types, incompati-
ble text stored within an audio file may be
displayed incorrectly.

! Text information items that can be changed

depend on the media.

Selecting and playing files/
tracks from the name list

Press

to switch to the file/track name

list mode.

Use M.C. to select the desired file name

(or folder name).

Selecting a file or folder
1 Turn M.C.

Playing
1 When a file or track is selected, press M.C.

Viewing a list of the files (or folders) in the se-
lected folder
1 When a folder is selected, press M.C.

Playing a song in the selected folder
1 When a folder is selected, press and hold M.C.

Operations using special buttons

Selecting a repeat play range
1 Press 6/

to cycle between the following:

! ALL – Repeat all files
! ONE – Repeat the current file
! FLD – Repeat the current folder

Playing tracks in random order
1 Press 5/

to turn random play on or off.

Tracks in a selected repeat range are played in
random order.

! To change songs during random play, press d

to switch to the next track. Pressing c restarts
playback of the current track from the begin-
ning of the song.

Pausing playback
1 Press 4/PAUSE to pause or resume.

Enhancing compressed audio and restoring rich
sound (sound retriever)
1 Press 3/S.Rtrv to cycle between:

—2—OFF (off)

1 is effective for low compression rates, and 2
is effective for high compression rates.

Function settings

Press M.C. to display the main menu.

Turn M.C. to change the menu option

and press to select FUNCTION.
Once selected, the function below can be ad-
justed.

S.RTRV (sound retriever)

Automatically enhances compressed audio and
restores rich sound.
1 Press M.C. to select the desired setting.

For details, refer to Enhancing compressed
audio and restoring rich sound (sound retriever)
on this page.

iPod

Basic operations

Playing songs on an iPod
1 Open the USB port cover.
2 Connect an iPod to the USB cable using an

iPod Dock Connector.
Playback is performed automatically.

Selecting a song (chapter)
1 Press c or d.

Selecting an album
1 Press 1/ or 2/ .

Fast forwarding or reversing
1 Press and hold c or d.

Notes

! The iPod cannot be turned on or off when the

control mode is set to

CONTROL AUDIO.

! Disconnect headphones from the iPod be-

fore connecting it to this unit.

! The iPod will turn off about two minutes after

the ignition switch is set to OFF.

Switching the display

Selecting the desired text information
1 Press DISP to cycle between the following:

CONTROL AUDIO/CONTROL iPod
! TRACK INFO (track title/artist name/album

title)

! ELAPSED TIME (track number and play-

back time)

! CLOCK (source name and clock)
! SPEANA (spectrum analyzer)
CONTROL APP
! CONTROL APP (APP MODE is displayed)
! CLOCK (source name and clock)
! SPEANA (spectrum analyzer)

Operating this unit

Section

Operating this unit