Buffalo Technology Buffalo AirStation WLI-CB-G54HP - Manual (Page 5)

5
Step 3: Configuring Wireless Zero Configuration Service
Note: Skip to Page 9 if you are not using Windows XP or prefer not to use
Windows XP's Wireless Zero Configuration Service. If you plan on using AOSS,
then please skip to Page 9 and install the Client Manager software.
• If the Wireless Zero
Configuration Service is
activated, Windows will scan for
available wireless access points
once the Wireless Notebook
Adapter is properly installed. If
Windows detects one or more
access points, a networking icon
appears in the taskbar. One
or more wireless networks are
available appears as a caption
accompanying the icon.
Note: If the Wireless Zero Configuration Service is not functioning, select Start »
Control Panel » Administrative » Tools » Services. Select Automatic in the
Startup type field to enable the Wireless Zero Configuration Service. The default
value is Automatic.
• Right click the networking
icon in the taskbar and select
View Available Wireless
Networks to display a list of
available wireless networks.
See the next step if you
need to enter an SSID
network name or WEP/WPA
encryption key. Select an
access point network
name or SSID and click the
Connect button to establish
a connection.