4] setting the buffer size, 5] to confirm driver version – Pioneer MEP-7000 User Manual
Page 5
5
En
[4] Setting the buffer size
The MEP-7000 is equipped with functions as an audio device
compliant with ASIO (Audio Stream Input Output)
specifications. To adjust the buffer size of the device, click on
the Windows [
START] menu button, then [View All
Programs]
[
Pioneer]
[
MEP-7000 [SEP-C1]]
[
MEP-
7000 ASIO Settings Utility].
* Setting the buffer size to a higher value will help prevent
audio dropouts (interrupted sound), but the resulting audio
data latency may result in increased time lags.
* If a program (DJ software, etc.) that uses the MEP-7000 as
its designated audio device is currently running, close the
program, then adjust the buffer size.
[5] To confirm driver version
To confirm the verson of the installed driver, click on Windows
[
START] button, followed by [View All Programs]
[
Pioneer]
[
MEP-7000 [SEP-C1]]
[
MEP-7000 [SEP-C1]
Version Display Utility].
* This screen also allows you to confirm the version of the
firmware currently installed. Note, however, that the
firmware version will not be displayed if the MEP-7000 is not
connected to a computer, or if the computer is not
communicating properly with the MEP-7000.
* Up-to-date information regarding MEP-7000 driver software
can be found at the following website:
© 2008 PIONEER CORPORATION. All rights reserved.
• Pioneer is a registered trademark of Pioneer Corporation
• Microsoft and Windows are registered trademarks of Microsoft Corporation, registered in the U.S. and other countries.
Windows’ official name is “Microsoft Windows Operating System.”
• ASIO is a registered trademark of Steinberg Media Technologies GmbH.
• All other brand, product and company names are the trademarks or registered trademarks of their respective owners.