Pioneer HTP-071 - Manual (Page 27)

ARC (Audio Return Channel) function
27
En
06 06
Chapter 6:
ARC (Audio Return
Channel) function
If your TV supports an audio return channel function, con-
nect your TV and this unit with an HDMI cable and the TV
audio will be inputted into this unit via the HDMI terminal
without the need for an audio cable to be connected. Turn
ON the “ARC” in the HDMI SETUP when using this function.
Important
• Use a High Speed HDMI ® Cable when using the ARC
function. The ARC function may not operate properly with
other HDMI cables.
ARC Setup
1 Press  RECEIVER to switch the receiver on.
2 Press , then press SETUP.
The System Setup menu appears on the front panel display.
Use /// and ENTER on the remote control to
navigate through the screens and select menu items. Press
RETURN
to confirm and exit the current menu.
• Press SETUP at any time to exit the System Setup menu.
3 Use / to select ‘HDMI SET’ from the System Setup
menu, then press ENTER.
4 Use / to choose the ‘ARC’ setting you want.
When a TV supporting the HDMI Audio Return Channel
function is connected to the receiver, the sound of the TV can
be input via the HDMI terminal.
• ON – The TV’s sound is input via the HDMI terminal.
• OFF – The TV’s sound is input from the audio input
terminals other than HDMI inputs.
5 When you’re finished, press RETURN.
You return to the System Setup menu.
Before starting ARC operation
When starting ARC operation, put the TV and this unit in
STANDBY mode after connecting this unit with the TV. Next,
turn ON the power of this unit and then the TV, in this order.
In order to start ARC operation, after connecting this unit to
a TV with an HDMI cable, you will need to switch the input
on the TV to the input mode required to connect to this unit.
Then, you can select a TV program.
Important
• The ARC function may not operate even if the above
conditions are met. If this is the case, listen to the TV
audio after connecting this unit and the TV with an audio
cable.
• The CEC (Consumer Electronic Control) function may
activate when the ARC function is turned ON, causing
power to turn ON and OFF and the input to switch from
one to another. Since this unit does not guarantee
synchronized operation based on the CEC function, we
recommend that you turn OFF the HDMI CONTROL
setting on the connected player. This unit may not
operate properly if the HDMI CONTROL on the player is
ON. Refer to the relevant device’s instruction manual for
details. If this does not work, turn OFF the ARC function.
If this is the case, listen to the TV audio after connecting
this unit and the TV with an audio cable.
In addition, this unit does not guarantee synchronized
operation that allows the TV remote control to operate the
volume (including mute). Use this unit to operate the
volume (including mute).
• Turn OFF the power and remove the power cable from the
wall socket when connecting other devices or making
connection changes to this unit. After all connections are
completed, insert the power cable into the wall socket.
• If the power cable is connected when the ARC function is
ON, the HDMI will take 2 to 10 seconds to initialize. This
unit cannot be operated during the initialization. During
initialization, the HDMI indicator on the display will blink.
Turn ON the unit after blinking stops.
RECEIVER