beautypg.com

Listening to the dab, About dab+ (digital audio broadcasting), Auto scan – Pioneer X-HM21BTD-K User Manual

Page 27: Selecting a station in the station list, Manual tune, Using the tuner 08

background image

Using the tuner

08

27

En

Listening to the DAB+

About DAB+ (Digital Audio
Broadcasting)

Digital Audio Broadcasting is a digital transmission system

where audio signals are converted to digital signals for

broadcasting. DAB+ is broadcast as a group of data called

multiplex (ensemble) which may contain one or more stations

(services). Each station contains a primary service and there

may be one or more secondary services. This allows several

programmes or services to be transmitted on a single

frequency.

Auto Scan

When turned on for the first time, the unit scans radio

stations automatically to create a station list. You can make

the auto scan again when you move the unit to other areas or

add multiplex channels to the station list.

1

Press the TUNER until “DAB” appears on the

display.

2

Press DAB SCAN on the remote control for

more than 3 seconds.

Auto Scan scanning begins.

After the scan:

The stations will be stored in alphanumeric order and the first

station on the list will be selected and you will hear it through

the speakers.

• To listen to other stations, see Selecting a station in the

station list below.

Note

• If no station is found, “NO SIGNAL” appears.
• Up to 100 appears for total received stations.

Selecting a station in the station list

Once a DAB+ station is received, you can select stations in

the station list.

1

Press the TUNER until “DAB” appears on the

display.

2

Whilst receiving a DAB+ station, press the

TUNE +/– to select the desired station.

3

Within 10 seconds, press the DAB ENTER on

the remote control to tune into the desired
station.

Manual tune

You can manually store stations which Auto Scan cannot

find. If reception is poor, you can adjust the sensitivity.

Manual tune is only available after Auto tune. Perform Auto

Scan first.

1

Press the TUNER until “DAB” appears on the

display.

2

Press the DAB SCAN once.

3

Within 10 seconds, press the TUNE +/– to

select the DAB+ frequency.

4

Within 10 seconds, press the DAB ENTER.

• If the level is too low, move the aerial or unit to improve

reception.

DAB + SIGNAL

MULTIPLEX

(ENSEMBLE)

SERVICES

SERVICES

COMPONENTS

(STATIONS)

DISPLAY

FOLDER

MENU

PRESET

VOLUME

ST/MONO

ASPM

PTY

DISPLAY

+

MUTE

TUNE–

TUNE+

DIMMER



+

MEMORY

/PROGRAM

RDS

ENTER

SCAN ENTER DISPLAY

DAB

X-HM21BTD.book 27 ページ 2013年11月21日 木曜日 午前9時1分