Before installing this unit, Installation with the holder, Connecting the units – Pioneer AVH-X8500BT User Manual

Page 7: Installation

Installing the HDMI cable holder

% Position the HDMI cable holder to insert
its two lower tabs into the groove of this
product, and then tighten the screw (3 mm ×
5 mm) to fix the HDMI cable holder.

1 HDMI cable holder
2 Screw (3 mm × 5 mm)
3 Tab
4 Groove
! Use the HDMI cable holder when you con-

nect this product with the separately sold
App Connectivity Kit (CD-IH202/CD-AH200).

! Never grip the holder tightly or use force

when removing or attaching.

Notes

! Check all connections and systems before

final installation.

! Do not use unauthorized parts as this may

cause malfunctions.

! Consult your dealer if installation requires

drilling of holes or other modifications to the
vehicle.

! Do not install this unit where:

— it may interfere with operation of the vehicle.
— it may cause injury to a passenger as a result

of a sudden stop.

! Do not install the display where it may (i) ob-

struct the driver

’s vision, (ii) impair the per-

formance of any of the vehicle

’s operating

systems or safety features, including air
bags, hazard lamp buttons or (iii) impair the
driver

’s ability to safely operate the vehicle.

! The semiconductor laser will be damaged if

it overheats. Install this unit away from hot
places such as near the heater outlet.

! Optimum performance is obtained when the

unit is installed at an angle of less than 30°.

! When installing, to ensure proper heat dis-

persal when using this unit, make sure you
leave ample space behind the rear panel and
wrap any loose cables so they are not block-
ing the vents.

5cm

Leave ample
space

5 cm

Before installing this unit

% Remove the holder.

1 Holder

(factory-supplied part)

Installation with the holder

Install the holder into the dashboard.

After inserting the holder into the dashboard, se-
lect and bend the tabs appropriate to the thick-
ness of the dashboard material. (Install this unit
as firmly as possible using the top and bottom
tabs. To secure this unit, bend the tabs 90 de-
grees.)

English

Connecting the units

Section

Installation