BT 60 - Manual (Page 42)

PaperJet 60 user guide – Edition 3 – 29.8.00
40
To adjust the duration of the phone call
alert beeps
When your PaperJet 60 is set to
PHONE/FAX RX
mode it automatically
answers all calls. If it is a phone call, it is set
to beep for 20 seconds to alert you to pick
up the handset. You can adjust the duration
of these beeps.
Press until the display shows INSTALLATION
Display shows TEL.LINE SET-UP
Press until the display shows FAX/TEL
TIMER:20
Press to switch between the options of 15,
20
, 30 and 40 seconds.
Press to confirm the option displayed.
To return to standby.
Receiving a fax call via an extension phone
(Remote Start)
If you answer a call on an extension phone connected
to the same line as your PaperJet 60 and you hear
fax tones, you can switch your PaperJet 60 into fax
receive mode by dialling
✱ 5. This is like pressing
the Start button.
When you hear your PaperJet 60 respond with its
own fax tones, hang up the extension phone.
You can replace the 5 of this code with any digit
from 0-9.
To change the remote start code
Press until the display shows INSTALLATION
Press until the display shows PUB.LINE
(PSTN)
If connected to a switchboard, press the >
button to display PRIV. LINE (PBX).
Press until the display shows REMOTE
START: ON
Press to switch between ON and OFF. If you
select Off, you will not be able to enter a
code on the attached phone to receive a fax.
Display shows TYPE CODE
Enter the 0-9 digit you want after the ✱ .
It is shown in the display, e.g. *8 Note that
the first
✱ cannot be changed.
Press to confirm.
To return to standby.