BT 60 - Manual (Page 21)

PaperJet 60 user guide – Edition 3 – 29.8.00
19
To fax from memory
Your PaperJet 60 has a memory which lets
you store one document for sending at a
pre-set time.
Place document face down in the document
feeder.
If necessary set the Contrast and Resolution
settings.
Display shows TX FROM MEMORY
The document is scanned into the memory.
Display shows STORING then TYPE TIME
HH:MM
Enter the time at which you want your fax
to be sent, e.g. 18.30 or press the Start
button to select the current time.
Display shows TYPE FAX NUMBER
Use the keypad to dial the number you
want.
Display shows TYPE FAX NUMBER. If
required, enter the second number to which
you want to send your fax and press the
Start button again.
Display shows TYPE NUMBER and the
number already entered.
You can change the number if required.
Display shows TYPE NUMBER and the next
number if already entered.
You can now change the number if required
and repeat the last 2 steps for all entered
numbers. When all existing numbers have
been shown the display shows TYPE FAX
NUMBER
.
Enter a new number if required.
Display shows TYPE FAX NUMBER.
Repeat the last 2 steps until you have entered
all the numbers you want up to a maximum
of 10.
To broadcast a document
You can set your machine to send a document to up
10 different numbers (broadcasting).
See “To fax from memory” below.
If using the 12 hour clock, press the Function
button to switch between a for AM and p for PM.
Press the < > buttons to move the cursor.
To change, re-send or cancel a stored
document
When you have stored a document in the
memory for sending later:
Display shows AUTOMATIC RX
MEMORY TX
Display shows TX FROM MEMORY
Display shows ALREADY ENTERED
Display shows PRINT SETTING?