Recording mode, Connecting using the s-video output, Not applicable to the european model) – Pioneer DCS-222 User Manual

Page 70: Connecting using the component video output, Not applicable to the, European model), Using the scart av output, Other connections 12

Other connections

Recording mode

The Recording mode allows you to make
analog recordings from the

LINE 1 (OUT)

jacks.

When Recording mode is on, most sound-
related functions (including

SURROUND

ADVANCED

AUTO

SYSTEM SETUP

)

become inactive. The display will briefly blink

RecMode On

if you try and use a prohibited

function while Recording mode is on.

When Recording mode is off, the audio from
the analog output may be interrupted,
depending on the operation.

Press SOUND.

Use the

(cursor left/right)

buttons to select ‘Rec Mode?’.

Press ENTER.

Use the

(cursor up/down)

buttons to select ‘R.Mode On’ or ‘R.Mode
Off’.

Connecting using the S-video
output

Not applicable to the European model

If your TV has an S-video input, you can use
this instead of the standard video output for a
better quality picture.

•

Use an S-video cable (not supplied) to

connect the S-VIDEO OUT to an S-video
input on your TV.

Line up the small triangle above the jack with
the same mark on the plug before plugging
in.

• The S-video ouptut is switchable between

S1 and S2 formats for compatibility with
all TVs. See

S-Video Out

on page 62 for