Pioneer AVM-P8000R - Manual (Page 49)

48
Continued overleaf.
Multi-CD Player
Scan Play
In the Disc Repeat, the beginning of each track on the selected disc is scanned for about 10
seconds. In the Multi-CD player Repeat, the beginning of the first track on each disc is
scanned for about 10 seconds.
1. Select “Scan” by moving the joystick.
“Scan” is highlighted in green.
2. Switch the Scan Play ON by clicking the joy-
stick.
After selecting the desired repeat play range from those
referred to in “Repeat Play” on page 47, switch Multi-
CD Player Scan Play ON.
3. When you find the desired track (or disc), can-
cel the Scan Play by clicking the joystick.
If the Function Menu has been canceled automatically,
select the “Scan” in the Function Menu again.
Display Play range
DISC SCAN Disc Repeat
MULTI SCAN Multi-CD player Repeat
Note:
• Scan Play is canceled automatically after all the tracks or discs have been scanned.
• One-track Repeat changes to the Disc Repeat when you switch the Scan Play ON.
ITS Play
ITS Play plays the memorized track. (Refer to “ITS Programming (ITS)” on page 53.) ITS
play of tracks is performed within the play range explained in the “Repeat Play” section.
1. Select “ITS” by moving the joystick.
“ITS” is highlighted in green.
2. Click the joystick.
Each click toggles ITS play On/Off.
After selecting the desired repeat play range from those
referred to in “Repeat Play” on page 47, switch ITS
Play ON.
Note:
• If no track in the current range is programmed for ITS Play,
“Empty” is displayed.
Source plate
Scan Play range
Source plate
ITS Play