Pioneer SC-2022-K - Manual (Page 3)

3
SPEAKERS
FRONT CENTER A A R L SURROUND R L FRONT HEIGHT / FRONT WIDE / B R L (Single) SURROUND BACK R L
PRE OUT SUBWOOFER 1 2 SURROUND SURR BACK FH / FW (Single) FRONT
CENTER
L
R
PRE OUT
SUBWOOFER 1 2 SURROUND SURR BACK FH / FW
(Single)
FRONT
CENTER
L
R
(Single)
SPEAKERS
FRONT CENTER A A
R L
SURROUND
R L
SURROUND BACK
R L
FRONT HEIGHT / FRONT WIDE / B
R L
LINE LEVEL
INPUT
LINE LEVEL
INPUT
Connecting up
Connecting the speakers
The receiver will work with just two stereo speakers (the front speakers in the diagram) but using
at least five speakers is recommended, and a complete setup is best for surround sound.
To achieve the comfortable surround sound, install your speakers as shown below.
7.2 channel surorund system:
After installing the speakers, connect them as shown below.
L – Front Left
C – Center
R – Front Right
SL – Surround Left
SR – Surround Right
SBL – Surround back Left
SBR – Surround back Right
SW – Subwoofer
Connecting the speaker cables
Make sure you connect the speaker on
the right to the right (R) terminal and the
speaker on the left to the left (L) terminal.
Also make sure the positive and negative
(+/–) terminals on the receiver match those
on the speakers.
1 Twist exposed wire strands together.
2 Loosen terminal and insert exposed
wire.
3 Tighten terminal.
1 2 3
10 mm
CAUTION
• Before making or changing connections,
switch off the power and disconnect the
power cord from the AC outlet.
• These speaker terminals carry
HAZARDOUS LIVE voltage. To prevent the
risk of electric shock when connecting
or disconnecting the speaker cables,
disconnect the power cord before
touching any uninsulated parts.
SL
L
R
SR
SBL
SBR
SW 2
SW 1
C
Subwoofer 1
(SW)
Subwoofer 2
(SW)
Front Right
(R)
Surround Right
(SR)
Surround Left
(SL)
Front Left
(L)
Center
(C)
Surround back Right
(SBR)
Surround back Left
(SBL)
Note
• If you have two subwoofers, the second subwoofer can be connected to the SUBWOOFER 2
terminal. Connecting two subwoofers increases the bass sound to achieve more powerful
sound reproduction. In this case, the same sound is output from the two subwoofers.
• This unit supports speakers with a nominal impedance of 4 W to 16 W.