14 installation, When connecting to separately sold power amp – Pioneer AVH-P6300BT User Manual
Page 76

When connecting to separately sold power amp
This product
Rear output
(REAR OUTPUT)
Front output
(FRONT OUTPUT)
Subwoofer output
(SUBWOOFER OUTPUT)
13 cm
13 cm
17 cm
Blue/white
Connect to system control
terminal of the power amp
(max. 300 mA 12 V DC).
Blue/white (6*)
Connect to auto-antenna
relay control
terminal (max. 300 mA 12 V DC).
The pin position of the ISO connector
will differ depending on the type of
vehicle. Connect 5* and 6* when Pin 5
is an antenna control type. In another
type of vehicle, never connect 5* and 6*.
Blue/white (5*)
Rear speaker
Perform these connections when
using the optional amplifier.
System remote control
Front speaker
Front speaker
Left
Right
Rear speaker
Power amp
(sold separately)
Power amp
(sold separately)
Power amp
(sold separately)
Subwoofer
Subwoofer
Connect with RCA cables
(sold separately)
To front output
To rear output
To subwoofer
output
•When you connect the separately sold
multi-channel processor
(DEQ-P6600) to this unit, do not
connect anything to the speaker leads
and system remote control
(blue/white).
•When you connect the multi-channel
processor to this unit, refer to
multi-channel processor’s installation
manual for the connection method.
En
76
Section
14
Installation