Resuming playback from where, You stopped, Stopping playback and switching – Pioneer DV-340 User Manual
Page 24: Power off, Stopping playback and switching power off, Resuming playback from where you stopped, Press stop 7 ( 7 on the front panel), Press open/close ( 0 on the front panel), Remove the disc, Press ( standby/on on the front panel)
24
En
1
Press STOP
7 (7 on the front panel).
Playback stops.
2
Press OPEN/CLOSE (
0 on the front panel).
The disc tray comes out.
3
Remove the disc.
4
Press ( STANDBY/ON on the front
panel).
The disc tray goes back in.
0
4
¢
1
¡
7
8
3
Stopping Playback and
Switching Power Off
– DVD/Video CD/CD
Resuming Playback from
Where You Stopped
– DVD/Video CD
Use the resume feature to restart playback from the
point that the disc was stopped last time.
Press STOP
7 once.
The display shows “RESUME” and the stop position is
memorized.
• The resume position remains memorized as long as
the disc is in the player — even if you switch the
power off.
• Pressing STOP
7 twice causes the disc to return to
the beginning when PLAY
3 is pressed again. The
display shows the disc type (DVDs or Video CDs).
Press PLAY
3.
Playback starts from the resume position.
Notes
• The actual restart position may be slightly before or after
the resume position.
• If you want to remove the disc, but still want to resume
playback from the last stopped position, use the LAST
MEMORY feature instead (page 46).
DVD PLA
YER
Î
3
8
7
¡ ¢
4 1
0
STANDBY/ON
4
3
2
1
RANDOM
PROGRAM SEARCH MODE
0
9
8
7
+10
6
5
4
CLEAR
3
2
1
1
REV FWD
¡
PLAY
3
PAUSE
8
STOP
7
e
STEP/SLOW
E
NEXT
¢
PREV
4
RETURN
REPEAT
CONDITION
MEMORY
LAST
MEMORY
ANGLE
SUB TITLE
AUDIO
SETUP
MENU
TOP MENU
DISPLAY
¶
5
∞
3
2
Î
¶
OPEN/
CLOSE
REPEAT
A-B
¶
¶
5
5
5
5
EN
TER
¶
¶
4
1
2