Ex) 40, Using balance adjustment 40, Compensating for equalizer – Pioneer DEH-P7700MP User Manual

Page 40: Introduction of audio adjustments, Compensatingfor equalizer curves (eq-ex), Usingbalance adjustment, Audio adjustments

Introduction of audio

adjustments

1 Audio display

Shows the audio adjustments status.

% Press AUDIO to displaythe audio func-

tion names.

Press AUDIO repeatedly to switch between

the following audio functions:

Fad (balance adjustment)EQ (equalizer

curve adjustment)Bass (bass and treble

level adjustment)Loud (loudness)

Sub-W1 (subwoofer on/off setting)/NonFad

(nonfading output on/off setting)Sub-W2

(subwoofer setting)/NonFad (nonfading out-

put setting)HPF (high pass filter)SLA

(source level adjustment)ASL (automatic

sound levelizer)

# If EQ-EX function has been selected and only
when EQ-EX is turned on and CUSTOM is se-
lected as the equalizer curve, you can switch to
Bass.
# When the subwoofer controller setting is only
PREOUT:FULL, you cannot switch to Sub-W1.
(Refer to page 48.)
# You can select the Sub-W2 only when sub-
woofer output is turned on in the Sub-W1.
# When the subwoofer controller setting is only
PREOUT:FULL, you can switch to the nonfading
output on/off setting. (Refer to page 48.)
# You can select the nonfading output setting
only when nonfading output is turned on in the
nonfading output on/off setting.
# When selecting the FM tuner as the source,
you cannot switch to SLA.

# To return to the display of each source, press
BAND.

Note

If you do not operate the audio function within
about 30 seconds, the display is automatically re-
turned to the source display.

Compensatingfor

equalizer curves (EQ-EX)

The EQ-EX function smoothes the effects of

each equalizer curve. Furthermore, you can

adjust bass and treble for each source when

CUSTOM curve is selected.

% Press and hold SW to turn EQ-EX on.

EQ-EX ON appears in the display. EQ-EX is

now on.

# To turn EQ-EX off, press and hold SW.
# If you do not operate the EQ-EX within about 8
seconds, the display automatically returned to
the source display.

Usingbalance adjustment

You can select a fader/balance setting that

provides an ideal listening environment in all

occupied seats.

1 Press AUDIO to select Fad.

Press AUDIO until Fad appears in the display.

# If the balance setting has been previously ad-
justed, Bal will be displayed.

2 Press a or b to adjust front/rear speak-

er balance.

Each press of a or b moves the front/rear

speaker balance towards the front or the rear.

Audio Adjustments

Section