Tuner listening to the radio 13, Listeningto the radio, Tuner – Pioneer DEH-P7700MP User Manual

Page 13

Listeningto the radio

These are the basic steps necessary to operate

the radio. More advanced tuner operation is

explained starting on the next page.

This units AF (alternative frequencies search)

function can be turned on and off. AF should

be off for normal tuning operation (refer to

page 17).

1 Stereo (ST) indicator

Shows that the frequency selected is being

broadcast in stereo.

2 LOC indicator

Shows when local seek tuning is on.

3 Preset number indicator

Shows which preset has been selected.

4 Band indicator

Shows which band the radio is tuned to,

MW, LW or FM.

5 Frequencyindicator

Shows to which frequency the tuner is

tuned.

1 Press SOURCE to select the tuner.

Press SOURCE until you see Tuner displayed.

2 Press BAND to select a band.

Press BAND until the desired band is dis-

played, FM1, FM2, FM3 for FM or MW/LW.

3 To perform manual tuning, brieflypress

c or d.

The frequencies move up or down step by

step.

4 To perform seek tuning, press and hold

c or d for about one second and release.

The tuner will scan the frequencies until a

broadcast strong enough for good reception is

found.

# You can cancel seek tuning by briefly pressing
either c or d.
# If you press and hold c or d you can skip sta-
tions. Seek tuning starts as soon as you release
the button.

Tuner

English

Section