Din rear-mount – Pioneer AVX-7300 User Manual

Page 11

Text mode
Original mode

ENGLISH

ESPAÑOL

DEUTSCH

FRANÇAIS

ITALIANO

NEDERLANDS

ENG/MASTER 96 INST

7 When the installation space is not very deep

When installing in a shallow space, secure with side brackets (small). In this case, stick
conceal tape on parts that protrude from the dashboard.

Fig. 9

DIN Rear-mount

Installation using the screw holes on the side of the unit

1. Remove the frame. (Fig. 10)

Fig. 10

Frame

Pull out to remove the frame.
(When reattaching the frame, point the
side with a groove downwards and
attach it.)

Holder
After inserting the holder into the dash-
board, then select the appropriate tabs
according to the thickness of the dash-
board material and bend them.
(Install as firmly as possible using the
top and bottom tabs. To secure, bend
the tabs 90 degrees.)

182

Rubber bush

Screw

Dashboard

Attach screw

Side bracket
(small)

Conceal tape

1_CRD3481A_EW_Eng 09-05-2001 08:55 Page 11