Baracoda All in One Printer - Manual (Page 17)

ToughRunners / ScanWear – Communication Protocol v1.2 - 17 -
Data Capture
for Workforce
in Motion
Command ID 0x63
Description Set remote triggering settings
Length 7
payload ABCDEFG
where :
A = character to trigger a Good Read signal
B = character to trigger a Good Read signal
C = character to trigger a Simple Scan
D = character to start an Multiscan Session
E = character to stop an Multiscan Session
F = character to lock the scan engine
G = character to unlock the scan engine
Response 0 (1 = ERROR)
3.8. Decoder commands
Command ID 0x80
Description Get symbology settings
Length 0 or 1
payload none
Response 17 or 20 bytes (since version 3.02.03) (cf. Appendix
B for more details)
If length = 0 then 17 bytes, if length = 1 then 20
bytes
Default value:
0xB4 0x90 0xEF 0x20 0x36 0x00 0x00 0x00 0x77 0x00 0x00 0x00 0xE3
0x2F 0x08 0x00 0x1D