Audio adjustments, Introduction of audio adjustments 42, Using balance adjustment 42 – Pioneer DVH-P500UB User Manual
Page 42: Using the equalizer 42, Operating this unit, Introduction of audio adjustments, Using balance adjustment, Using the equalizer

Audio Adjustments
Introduction of audio adjustments
1
Press MULTI-CONTROL to display the
main menu.
2
Use MULTI-CONTROL to select AUDIO.
Turn to change the menu option. Press to se-
lect.
The audio menu is displayed.
3
Turn MULTI-CONTROL to select the
audio function.
Turn
MULTI-CONTROL to switch between the
audio functions in the following order.
FADER (balance adjustment)
—P.EQ (equalizer
recall)
—EQ-LOW (equalizer adjustment)—
EQ-LOW (equalizer fine adjustment)
—
LOUDNESS (loudness)
—SUB W1 (subwoofer
on/off setting)
—SUB W2 (subwoofer setting)
—HPF (high pass filter)—BASS BOOST (bass
boost)
—SLA (source level adjustment)
# You can also use A.MENU on the remote con-
trol to select an audio menu.
# You can select the SUB W2 only when sub-
woofer output is turned on in
SUB W1.
# When selecting FM as the source, you cannot
switch to
SLA.
# To return to the display of each source, press
BAND.
# If you do not operate the audio function within
about 30 seconds, the display is automatically re-
turned to the source display.
Using balance adjustment
You can change the fader/balance setting so
that it can provide the ideal listening environ-
ment in all occupied seats.
1
Use MULTI-CONTROL to select FADER.
Refer to Introduction of audio adjustments on
this page.
# If the balance setting has been previously ad-
justed,
BALANCE will be displayed.
2
Push MULTI-CONTROL up or down to
adjust front/rear speaker balance.
FADER :F15 to FADER :R15 is displayed as the
front/rear speaker balance moves from front to
rear.
# FADER :F/R0 is the proper setting when only
two speakers are used.
# When the rear output setting is SUB W, you
cannot adjust front/rear speaker balance. Refer to
Setting the rear output and subwoofer controller
on page 54.
3
Push MULTI-CONTROL left or right to
adjust left/right speaker balance.
BALANCE :L15 to BALANCE :R15 is displayed
as the left/right speaker balance moves from
left to right.
Using the equalizer
The equalizer lets you adjust the equalization
to match the car
’s interior acoustic character-
istics as desired.
Recalling equalizer curves
There are six stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves.
Display
Equalizer curve
POWERFUL
Powerful
NATURAL
Natural
VOCAL
Vocal
CUSTOM
Custom
FLAT
Flat
SUPER BASS
Super bass
Operating this unit
En
42
Section
02