Pioneer DJM-600 - Manual (Page 25)

25
SPECIFICATIONS
Audio Section
Input terminal (input level/impedance)
CD/LINE .......................................... –14dBV (200mV)/22k
Ω
PHONO ............................................... –54dBV (2mV)/47k
Ω
MAIN MIC ............................................ –54dBV (2mV)/3k
Ω
SUB MIC ............................................... –60dBV (1mV)/3k
Ω
RETURN ......................................... –14dBV (200mV)/22k
Ω
Output terminal (output level/impedance)
MASTER OUT1 (RCA) ................................. 0dBV (1V)/1k
Ω
MASTER OUT2 (XLR) .......................... 4dBm (1.23V)/600
Ω
REC OUT (RCA) ........................................ –10dBV (1V)/1k
Ω
BOOTH MONITOR ...................................... 0dBV (1V)/1k
Ω
SEND ........................................................ –14dBV (1V)/1k
Ω
PHONES ...................................................... 0dBV (1V)/22
Ω
Frequency characteristics
CD/LINE/PHONO/MIC ................................. 20Hz to 20kHz
SN ratio
CD/LINE ........................................... 87dB (with effects off)
PHONO ........................................................................ 77dB
MIC .............................................................................. 69dB
Total harmonic distortion rate
CD/LINE/PHONO ........................................... Below 0.02%
Cross talk ............................................................... Over 70dB
Channel equalizer
HI ..................................................... +12dB, –26dB (13kHz)
MID .................................................... +12dB, –26dB (1kHz)
LOW ................................................. +12dB, –26dB (70Hz)
Microphone equalizer
HI ..................................................... +12dB, –12dB (10kHz)
MID .................................................... +12dB, –12dB (1kHz)
LOW ............................................... +12dB, –12dB (100Hz)
Effector
DELAY and ECHO ...................................... 1 to 3500mSec
PAN, TRANS, FILTER and FLANGER .... 10 to 16000mSec
REVERB .............................................................. 1 to 100%
PITCH ............................................................... 0 to ±100%
Electrical Section, etc.
Power supply voltage ..................................... AC 120V, 60Hz
Power consumption ........................................................ 36W
Operating temperature .................................... +5˚C to +35˚C
Operating humidity ............................................... 5% to 85%
External dimensions ............ 320 (W) x 372 (D) x 107 (H) mm
12-19/32 (W) x 14-5/8 (D) x 4-7/32 (H) in
Weight ........................................................................... 6.6kg
14lbs 9oz
Accessories
÷ Short-circuit pin plug ......................................................... 6
÷ Operating instructions ....................................................... 1
÷ Warranty ............................................................................ 1
For improvement purposes, specifications and design may
be subject to modification without notice.