Pioneer CNSD-210FM - Manual (Page 25)

4 Touch [Settings].
The
“Settings Menu” screen appears.
5 Touch [Bluetooth Settings].
The
“Bluetooth Settings” screen appears.
6 Touch [Firmware update].
The current version is displayed.
7 Confirm the Bluetooth firmware ver-
sion.
Make sure that the current version is 2.50.
8 Touch [Firmware update].
The message confirming whether or not to
start the update will appear.
9 Make sure that the current Bluetooth
firmware version is 2.50 and the new
Bluetooth firmware version is 3.10.
10 Touch [Yes].
Update starts.
11 Wait until the upgrade process is com-
plete.
A message will appear after the update is
complete.
12 Touch [OK].
The message disappears, and the map screen
returns.
13 Eject the upgrade microSD card #1
(8 GB).
14 Eject the upgrade microSD card #1
(8 GB) from the SD card adapter.
15 Insert the upgrade microSD card #2
(2 GB) into the SD card adapter.
16 Insert the upgrade microSD card #2
(2 GB) into the SD card slot.
17 Repeat steps 3 through 6.
18 Confirm the Bluetooth firmware ver-
sion.
Make sure that the current version is 3.10.
p If the current version is 2.50, return to step
1.
19 If the current version is 3.10, touch
[Firmware update].
The message confirming whether or not to
start the update will appear.
Engb
25
Chapter
04
Instructions
for
upgrading
Instructions for upgrading