Pioneer CNSD-210FM - Manual (Page 24)

8 Wait until the upgrade process is com-
plete.
After the installation is complete, the naviga-
tion system restarts.
Checking whether the upgrade
was done properly
Display
“Service Information Screen” screen
to compare the current version number with
the previous one.
1 Press the HOME button to display the
“Top Menu” screen.
2 Touch [Settings].
The
“Settings Menu” screen appears.
3 Touch [System Settings].
The
“System Settings” screen appears.
4 Touch [Service Information].
The
“Service Information Screen” screen ap-
pears.
5 Check the version information.
6 Eject the upgrade microSD card #1
(8 GB).
Updating the Bluetooth
wireless technology software
(for AVIC-F10BT)
p This update is for customers updating the
Bluetooth firmware of AVIC-F10BT for the
first time.
p For customers who upgraded the software
of AVIC-F10BT with CNSD-110FM, refer to
Updating the Bluetooth wireless technology
software (for AVIC-F20BT, AVIC-F920BT, AVIC-
F9210BT, AVIC-F9220BT and CNSD-110FM)
on page 26.
Access the Pioneer website to check your
phone
’s compatibility. If your phone is on the
list and you wish to update, manually update
the Bluetooth firmware after the automatic up-
grade is finished.
http://www.pioneer.eu
CAUTION
! Be sure to upgrade your navigation system
first.
! Be careful to follow the update procedure cor-
rectly. If you make a mistake, Bluetooth wire-
less technology functions will become
unavailable.
p Consult your authorised dealer if you are
unable to use Bluetooth wireless technol-
ogy functions.
! Be sure to complete the Bluetooth firmware
update procedure without interruption.
p Registered phones that are listed on the
“Connection List” screen are cleared by
the software update.
1 Insert the upgrade microSD card #1
(8 GB) into the SD card adapter.
2 Insert the upgrade microSD card #1
(8 GB) into the SD card slot.
3 Press the HOME button to display the
“Top Menu” screen.
Engb
24
Chapter
04 Instructions for upgrading