Pioneer AVH-P5200BT - Manual (Page 60)

2 Display the system menu.
Refer to Introduction of menu operations on
page 40.
3 Touch Auto PI on the system menu to
turn Auto PI Seek on.
# To turn Auto PI Seek off, touch Auto PI again.
Switching sound muting/
attenuation
Sound from this system is automatically
muted or attenuated when a signal from
equipment with a mute function is received.
! Sound from this system returns to normal
when the muting or attenuation is can-
celed.
1 Display the system menu.
Refer to Introduction of menu operations on
page 40.
2 Touch Mute/ATT until the desired set-
ting appears.
Touch
Mute/ATT until the desired setting ap-
pears in the display.
! Mute – Muting
! ATT-20dB – Attenuation (ATT -20dB has a
stronger effect than ATT -10dB)
! ATT-10dB – Attenuation
! Off – Turns the sound muting/attenuation
off
Notes
! When Mute is displayed, the sound is turned
off and no audio adjustments can be made.
! When ATT is displayed, the sound is attenu-
ated and only the volume can be adjusted.
(No other audio adjustments can be made.)
! Operation returns to normal when the phone
connection is ended.
Selecting the menu language
The menu language can be selected from four
languages.
If text information such as the title name, artist
name or a comment is embedded in a Eur-
opean language or Russian, they can also be
displayed on this unit.
! The language can be changed for the fol-
lowing:
— System menu
— Video Setup Menu
— On-screen display
— Multi language setting for DivX
! If the embedded language and the selected
language setting are not the same, text in-
formation may not be displayed properly.
! Some characters may not be displayed
properly.
! To complete this operation, switch the igni-
tion key off and on after you set this set-
ting.
1 Display the system menu.
Refer to Introduction of menu operations on
page 40.
2 Touch Language on the system menu to
select the desired language.
3 Touch the desired language.
Русский (Russian)—English (English)——
Español (Spanish)
—Português (Portuguese)
Clearing Bluetooth memory
Important
Never turn the unit off while the Bluetooth mem-
ory is being cleared.
1 Turn the unit off.
Refer to Basic Operations on page 9.
2 Display the system menu.
Refer to Introduction of menu operations on
page 40.
3 Touch Clear Memory on the system
menu.
En
60
Section
12 Menu operations