06 playing moving images – Pioneer AVH-P5200BT User Manual
Page 16
Playing back videos
1 Insert the disc into the disc loading slot with the
label side up.
Playback will automatically start.
! If you are playing a DVD or Video CD, a menu
may appear. Refer to Operating the DVD menu on
page 27 and PBC playback on page 31.
! When the automatic playback function is on, the
unit will skip the DVD menu and automatically
start playback from the first chapter of the first
title. Refer to Automatic playback of DVDs on page
57.
1 If a disc has already been inserted, press SRC/
OFF or touch the source icon to select the source.
! When the source icon is not displayed, it can be
displayed by touching the screen.
! Disconnect headphones from the iPod before
connecting to this unit.
! Depending on the iPod model and the amount of
data stored in the iPod, it may take some time for
playback to begin.
! Use the touch panel keys to select the iPod after
connecting it to this unit.
! No Device is displayed when disconnecting the
iPod.
1 If a message is displayed after loading a disc con-
taining DivX VOD content, touch
Play.
Refer to Playing DivX
Ejecting a disc
1 Refer to Ejecting a disc on page 12 or Ejecting an
Selecting a chapter using the buttons
1 Press c or d (TRACK).
Fast forwarding or reversing using the buttons
1 Press and hold c or d (TRACK).
! Fast forward/fast rewind may not always be possi-
ble on some discs. In such cases, normal play-
back will automatically resume.
Notes
! This DVD player can play back a DivX file re-
corded on CD-R/RW/ROM or DVD-R/RW/
ROM. (Please see the following section for
files that can be played back. Refer to page
81.)
! Do not insert anything other than a DVD (-R/-
RW) or CD (-R/-RW) into the disc loading slot.
! If the bookmark function is on, DVD playback
resumes from the selected point. For more de-
tails, refer to Resume playback (Bookmark) on
page 29.
! Some operations may not be available while
watching a DVD due to the programming of
the disc. In such cases, the
icon appears
on the screen.
! To ensure proper operation, connect the dock
connector cable from the iPod directly to this
unit.
! If the ignition switch is set to ACC or ON, the
iPod battery will be charged while connected.
However, the iPod battery is not charged when
you select an SD as the source.
! While the iPod is connected to this unit, the
iPod cannot be turned on or off.
However, the iPod can be turned on or off
when you select an SD as the source.
En
16
Section
06
Playing moving images