Calling the wake-up timer, Cancelling the wake-up timer, Using the wake-up timer – Pioneer X-SMC00BT User Manual
Page 15: Using the sleep timer, Using headphones, Getting started 04
Getting started
04
15
En
Calling the wake-up timer
An existing timer setting can be reused.
1
Follow steps 1 to 3 in “Setting the wake-up
timer”.
2
Press
/ to select “TIMER ON”, then press
ENTER.
Cancelling the wake-up timer
Turn off the timer setting.
1
Follow steps 1 to 3 in “Setting the wake-up
timer”.
2
Press
/ to select “TIMER OFF”, then
press ENTER.
Using the wake-up timer
1
Press
STANDBY/ON to turn the power
off.
2
At the wake-up time, this unit will turn on
automatically and play the selected input
function.
Note
• If at the wake-up time an iPod/iPhone/iPad mini is not
connected to the unit or a disc is not inserted, the unit
will be turned on but will not play back the track.
• Some discs may not be played automatically at the wake-
up time.
• When setting the timer set at least one minute between
the start and end time.
Using the sleep timer
The sleep timer switches off the unit after a specified time so
you can fall asleep without worrying about it.
1
Press SLEEP repeatedly to select a switch off
time.
Choose between 10 min, 20 min, 30 min, 60 min, 90 min, 120
min, 150 min, 180 min or OFF. The newly set value displays for
3 seconds, and then the setting is completed.
Note
• The sleep timer can be set by pressing SLEEP while the
remaining time is displayed.
Using Headphones
Connect the headphones plug to the PHONES terminal.
When the headphones are connected, there is no sound
output from the speakers.
• Do not turn the volume on to full at switch on and listen
to music at moderate levels. Excessive sound pressure
from earphones and headphones can cause hearing
loss.
• Before plugging in or unplugging the headphone,
reduce the volume.
• Be sure your headphone has a 3.5 mm diameter plug
and impedance between 16
and 50
. The
recommended impedance is 32
.
• Audio from the iPod/iPhone/iPad mini cannot be heard
via the headphones connected to the unit. “HP MUTE”
will be displayed if you connect the headphones when
the iPod/iPhone/iPad mini function is selected.
AUDIO IN
PUSH OPEN
POWER ON
TIMER
X-SMC00BTB_VXE8_En.book 15 ページ 2013年4月4日 木曜日 午後2時38分