Pioneer DEH-P9300R - Manual (Page 19)

U
sing radio text
This tuner can display radio text data transmit-
ted by RDS stations, such as station informa-
tion, the name of the currently broadcast song
and the name of the artist.
Note:
• When radio text is received, the “TXT” indicator
lights.
• The tuner automatically memorizes the three latest
radio text broadcasts received, replacing text from
the least recent reception with new text when it is
received.
• If you do not perform an operation within 30 sec-
onds, the radio text mode is canceled.
Displaying the radio text
1. Press NEXT to display “R.TEXT”.
Press NEXT until “R.TEXT” appears.
2. Press R.TEXT to switch to the radio text
mode.
3. Press
2 2
or
3 3
to recall the three latest
radio text broadcasts from the tuner’s
memory.
Pressing
2
or
3
switches between the four
radio text data displays.
Note:
• Press BAND to cancel the radio text mode.
• When no radio text is currently being received, “No
text” is displayed.
• If there is no radio text data stored in the tuner,
2
or 3 does not operate.
Storing radio text
You can store data from up to six radio text
transmissions under the buttons MEMO1 –
MEMO6.
1. Select the radio text you want to store in
memory.
Refer to “Displaying the radio text” on this
page.
2. Press and hold any of the buttons
MEMO1 – MEMO6 until “RT memo”
appears to store the desired radio text.
The radio text is stored in memory under the
selected button.
Recalling preset radio text
1. Press NEXT to display “R.TEXT”.
Press NEXT until “R.TEXT” appears.
2. Press R.TEXT to switch to the radio text
mode
3. Press any of the buttons MEMO1 –
MEMO6 to recall the radio text preset
under that button.
18
ENGLISH
ESPAÑOL
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS