Pioneer DEH-P9300R - Manual (Page 13)

12
ENGLISH
ESPAÑOL
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
Recalling broadcast stations
1. Press NEXT to display “1” – “6”.
Press NEXT until “1” – “6” appears.
2. Press any of the buttons 1 – 6 to recall a
station preset under that button.
Note:
• You can also use
5 or ∞ to recall broadcast sta-
tions memorized in the buttons 1 – 6.
T
uner function menu
The tuner function menu has the following func-
tions:
FM
MW/LW
Note:
• “AF”, “PTY” and “REG” are RDS functions for FM
bands. Refer to “RDS Functions”.
• If you do not operate the function within about 30
seconds, the display is automatically returned.
S
toring the strongest broadcast
stations
BSM (best stations memory) lets you automati-
cally store the six strongest broadcast stations
under the buttons 1 – 6.
1. Press FUNC to select the BSM mode.
2. Press BSM to turn the BSM on.
“Searching” appears. The six strongest
broadcast stations will be stored under the
buttons 1 – 6 and in order of their signal
strength.
When finished, “Searching” disappears.
• To cancel the storage process before it is
completed, press BSM again while
“Searching” appears.
T
uning in strong signals
Local seek tuning lets you tune in only those
broadcast stations with sufficiently strong sig-
nals for good reception.
1. Press FUNC and then press LOC to
select the local mode.
2. Press LOC to set the local seek sensitivi-
ty.
Press LOC repeatedly to switch between the
following settings:
FM:
Local OFF
=
Level 1
=
Level 2
=
Level 3
=
Level 4
MW/LW:Local OFF
=
Level 1
=
Level 2
• When the local mode is exited except for
“Local OFF” is selected, “LOC” appears on
the basic display.
Note:
• The “Level 4” setting allows reception of only the
strongest stations, while lower settings let you
receive progressively weaker stations.