Pioneer DEH-P88RS-II - Manual (Page 10)

9
Connecting the Units
Antenna jack
DSP switch
Switch the DSP switch as
illustration below.
ISO connector
Note:
In some vehicles, the ISO connector
may be divided into two. In this case,
be sure to connect to both connectors.
Blue/white
To system control terminal of the power
amp (max. 300 mA 12 V DC).
This product
Power cable
(For details, refer to page 3 to 4.)
Speaker leads
White
: Middle range left +
White/black : Middle range left ≠
Gray
: Middle range right +
Gray/black : Middle range right ≠
Green : High range left +
Green/black : High range left ≠
Violet
: High range right +
Violet/black : High range right ≠
Blue/white (6*)
Blue/white (7*)
To Auto-antenna relay control
terminal (max. 300 mA 12 V DC).
30 cm
Connection diagram for 3-way network mode with internal amp