Audio adjustments, Introduction of audio adjustments 34, Compensating for equalizer curves (eq – Pioneer DEH-P6700MP User Manual

Page 34: Ex) 34, Compensating for equalizer, Introduction of audio adjustments, Compensating for equalizer curves (eq-ex)

Introduction of audio

adjustments

1 CUSTOM indicator

Shows when custom equalizer curve is cur-

rently selected.

2 Equalizer curve

Shows which equalizer preset is currently

selected.

3 Audio display

Shows the audio adjustments status.

4 SW indicator

Shows when the subwoofer output is turned

on.

5 EQ-EX indicator

Appears in the display when EQ-EX function

can be activated.

6 LOUD indicator

Appears in the display when loudness is

turned on.

% Press AUDIO to displaythe audio func-

tion names.

Press AUDIO repeatedly to switch between

the following audio functions:

FAD (balance adjustment)EQ (equalizer

curve adjustment)BASS (bass and treble

level adjustment)LOUD (loudness)

SUB, W (subwoofer on/off setting)/NOFAD

(non fading output on/off setting)80: 0 (sub-

woofer setting)/NOFAD (non fading output

setting)HPF (high pass filter)SLA (source

level adjustment)

# If EQ-EX function has been selected and only
when EQ-EX is turned on and CUSTOM is se-
lected as the equalizer curve, you can switch to
BASS.
# When the subwoofer controller setting is only
P/O:FUL, you cannot switch to SUB, W. (Refer to
page 41.)
# You can select the 80: 0 only when subwoofer
output is turned on in the SUB, W.
# When the subwoofer controller setting is only
P/O:FUL, you can switch to the nonfading output
on/off setting. (Refer to page 41.)
# You can select the nonfading output setting
only when nonfading output is turned on in the
nonfading output on/off setting.
# When selecting the FM tuner as the source,
you cannot switch to SLA.
# To return to the display of each source, press
BAND.

Note

If you do not operate the audio function within
about 30 seconds, the display is automatically re-
turned to the source display.

Compensating for

equalizer curves (EQ-EX)

The EQ-EX function smoothes the effects of

each equalizer curve. Furthermore, you can

adjust bass and treble for each source when

CUSTOM curve is selected.

% Press and hold SW to turn EQ-EX on.

EQ-EX:ON appears in the display. EQ-EX is

now on.

# To turn EQ-EX off, press and hold SW.
# If you do not operate the EQ-EX within about 8
seconds, the EQ-EX function is cancelled auto-
matically.

Audio Adjustments

Section