Scanning cds and tracks 30, Pausing cd playback 30, Using its playlists 30 – Pioneer DEH-P6700MP User Manual

Page 30: Creating a playlist with its, Programming 30, Scanning cds and tracks, Pausing cd playback, Using its playlists, Multi-cd player, Creating a playlist with its programming

Note

If you turn random play on during DSC and then
return to the playback display, DRDM appears in
the display.

Scanning CDs and tracks

While you are using DSC, the beginning of

each track on the selected disc plays for about

10 seconds. When you are using MCD, the be-

ginning of the first track of each disc is played

for about 10 seconds.

1 Select the repeat range.

Refer to Repeating play on the previous page.

2 Press FUNCTION to select SCAN.

Press FUNCTION until SCAN appears in the

display.

3 Press a to turn scan playon.

SCAN :ON appears in the display. The first 10

seconds of each track of the current disc (or

the first track of each disc) is played.

4 When you find the desired track (or

disc) press b to turn scan playoff.

SCAN :OFF appears in the display. The track

(or disc) will continue to play.

# If the display has automatically returned to
the playback display, select SCAN again by press-
ing FUNCTION.

Notes

! After track or disc scanning is finished, nor-

mal playback of the tracks will begin again.

! If you turn scan play on during DSC and then

return to the playback display, DSCN appears
in the display.

Pausing CD playback

Pause lets you temporarily stop playback of

the CD.

1 Press FUNCTION to select PAUSE.

Press FUNCTION until PAUSE appears in the

display.

2 Press a to turn pause on.

PAUSE:ON appears in the display. Play of the

current track pauses.

3 Press b to turn pause off.

PAUSE:OFF appears in the display. Play will re-

sume at the same point that you turned pause

on.

Note

You can also turn pause on or off by pressing
PAUSE.

Using ITS playlists

ITS (instant track selection) lets you make a

playlist of favorite tracks from those in the

multi-CD player magazine. After you have

added your favorite tracks to the playlist you

can turn on ITS play and play just those selec-

tions.

Creating a playlist with ITS

programming

You can use ITS to enter and play back up to

99 tracks per disc, up to 100 discs (with the

disc titles). (With multi-CD players sold before

the CDX-P1250 and CDX-P650, up to 24 tracks

can be stored in the playlist.)

1 Playa CD that you want to program.

Press a or b to select the CD.

Multi-CD Player

Section