Pioneer AVH-P6800DVD - Manual (Page 98)

Note
About your country TV signal, consult with your
nearest Pioneer dealer.
Resetting the audio functions
You can reset all audio functions except vo-
lume.
! Only when the multi-channel processor
(e.g., DEQ-P6600) is connected to this unit,
you can operate this function.
1 Touch RESET on the initial menu.
Proceed with reset? appears and asks you to
confirm it.
2 Touch RESET again to reset audio func-
tions.
Reset completed is displayed and the audio
settings are reset.
# To cancel resetting the audio functions, touch
CANCEL.
Entering PIN code for
Bluetooth wireless connection
With some Bluetooth audio players, you may
be required to enter to this unit in advance
PIN code of your Bluetooth audio player, in
order to set this unit ready for a connection
from your Bluetooth audio player.
! Only when Bluetooth adapter (e.g. CD-
BTB100) is connected to this unit, you can
operate this function.
1 Touch PIN code input on the initial
menu.
PIN code input display appears.
2 Touch 0
—9 to input the PIN code of
your Bluetooth audio player.
# Touch C to delete the number.
3 After inputting PIN code (up to 16 di-
gits), touch ENTER.
The PIN code you entered is stored in this
unit.
Extending the vehicle
’s
antenna
At the standard setting, the antenna of your
vehicle is automatically retracted when you se-
lect the source
OFF or when the ignition
switch is at ACC. At this setting, the source re-
mains
OFF even when you receive an incom-
ing call through Bluetooth adapter (e.g. CD-
BTB100). If you want to take the incoming
calls you receive on the
OFF source, turn
AUTO ANT MODE off. The OFF source will be
switched to
Telephone and the antenna of
your vehicle will be extended when this unit re-
ceives an incoming call.
! Only when Bluetooth adapter (e.g. CD-
BTB100) is connected to this unit, you can
operate this function.
% Touch AUTO ANT MODE on the initial
menu to turn the auto antenna mode off.
The vehicle
’s antenna will be extended and the
source will be switched to Telephone every
time you receive an incoming call.
# To turn the auto antenna mode on, touch
AUTO ANT MODE again.
Initial Setup
En
98
Section
20