Pioneer AVH-P6800DVD - Manual (Page 102)

Using the AUX source
This unit can control an auxiliary equipment
such as VCR or portable device (sold sepa-
rately). When connected, auxiliary equipment
is automatically read in as AUX source and as-
signed to
AUX.
About AUX connection method
You have two methods to connect auxiliary
equipment to this unit.
Stereo mini pin plug cable
When connecting auxiliary equipment using a
stereo mini plug cable
% Insert the stereo mini plug into the
AUX input jack on this unit.
For more details, refer to the installation man-
ual.
IP-BUS-RCA interconnector
When connecting auxiliary equipment using an
IP-BUS-RCA Interconnector (sold separately)
% Use an IP-BUS-RCA Interconnector such
as the CD-RB20/CD-RB10 (sold separetely)
to connect this unit to auxiliary equipment
featuring RCA output.
For more details, refer to the IP-BUS-RCA Inter-
connector owner
’s manual.
# You can only make this type of connection if
the auxiliary equipment has RCA outputs.
Selecting AUX as the source
% Touch the source icon and then touch
AUX to select AUX as the source.
# When the source icon is not displayed, you
can display it by touching the screen.
# If the auxiliary setting is not turned on, AUX
cannot be selected. For more details, see Switch-
ing the auxiliary setting on page 95.
Setting the AUX title
The title displayed for the AUX source can be
changed.
1 After you have selected AUX as the
source, press A.MENU button and touch
FUNCTION and then touch EDIT.
2 Touch ABC to select the desired charac-
ter type.
Touch
ABC repeatedly to switch between the
following character types:
Alphabet (upper case), numbers and symbols
—alphabet (lower case)—European letters,
such as those with accents (e.g.,
б, а, д, з)
# You can select to input numbers and symbols
by touching
123.
3 Touch a or b to select a letter of the al-
phabet.
Each time you touch a it will display alphabet,
numbers or symbols in ascending order (
A B
C ...). Each time you touch b it will display a
letter in descending order.
4 Touch d to move the cursor to the next
character position.
When the desired letter is displayed, touch d
to move the cursor to the next position and
then select the next letter. Touch c to move
backwards in the display.
Other Functions
En
102
Section
21