Pioneer X-DS301-K - Manual (Page 14)

14
1. Connect the music source such as MP3 player to the Aux-in port at back
of the unit with a 3.5 mm aux cable.
2. Press FUNC and switch to AUX source. When AUX source is
selected, the display will show “AUX” on the screen.
NOTE
* When playing music through AUX source, the music volume will vary depending on
the volume of the music player. If there is distortion when the volume is set at max,
lower the music player’s volume and to avoid distortion.
Using Auxiliary Input
3.5 mm Auxiliary audio cable
(not included)
Music player
Using Alarm