Pioneer DDJ-WeGO-W - Manual (Page 12)

12 En
Operation (this unit’s features)
F E E
JOG FX mode types ( rE)
2 3 4 5 1
This unit is equipped with 5 types of JOG FX modes.
The JOG FX mode types are shown below.
Mode Description of mode
1 Key control
Key control is turned on and off by pressing the [CTRL A]
button.
When on, the key can be adjusted by turning the jog dial.
2 Effect 1
Effect 1 is turned on and off by pressing the [FX1] button.
When on, effect 1 parameter 1 can be adjusted by turning
the jog dial.
Also, effect 1 parameter 2 can be adjusted by turning the
jog dial while pressing the [SHIFT] button.
3 Effect 2
Effect 2 is turned on and off by pressing the [FX2] button.
When on, effect 2 parameter 1 can be adjusted by turning
the jog dial.
Also, effect 2 parameter 2 can be adjusted by turning the
jog dial while pressing the [SHIFT] button.
4 Effect 3
Effect 3 is turned on and off by pressing the [FX3] button.
When on, effect 3 parameter 1 can be adjusted by turning
the jog dial.
Also, effect 3 parameter 2 can be adjusted by turning the
jog dial while pressing the [SHIFT] button.
5 Filter
The filter is turned on and off by pressing the [CTRL B]
button.
When on, the filter can be adjusted by turning the jog dial.
! All modes are cancelled by pressing the [CTRL A] or [CTRL B] button
while pressing the [SHIFT] button.
! The respective effect’s type can be selected by pressing the [FX1],
[FX2] or [FX3] button while pressing the [SHIFT] button.
! The types and numbers of parameters differ according to the effect.
This operation has no effect for effects with no corresponding
parameters.
! For details on the effects that can be used, see the Pioneer website.
http://pioneerdj.com/support/
Changing the color of the jog dial’s
illumination ( rF)
This unit is equipped with a function for changing the color of the jog
dial’s illumination.
! The changed illumination color setting is retained even when this
unit’s power is turned off.
Selecting the color from the preset colors
Press the [CUE ] button while pressing the [SHIFT]
button to change the color of the illumination of the jog
dial.
The color of the illumination changes in the order shown below.
Illumination color Illumination mode
Frosty white
Pulse Mode Active
Red
Orange
Yellow
Green
Emerald green
Aqua
Blue
Violet
Off Pulse Mode Normal
! The color of the jog dial’s illumination can be switched indepen-
dently for the four decks.
! When the color is turned off for any of the four decks, the mode
switches to Pulse Mode Normal.
! Pulse Mode Active: Enables Mix Pulse and FX Pulse.
! Pulse Mode Normal: Disables Mix Pulse and FX Pulse.
— Mix Pulse
This indicates the offset in the beats of two tracks by the strength
of the lights. The jog dials’ lights are strongest when the beats
are perfectly in sync, and get dimmer as the beats move apart.
This lets you check the offset of the beats visually so that the
beats and tempos can be matched easily.
— FX Pulse
The lights on the jog dial move in various ways according to the
effect that is operated, adding excitement to the DJ performance
through the movement of the light in addition to the changes in
the sound.