Buffalo Technology WZR-RS-G54 - Manual (Page 43)

43
WAN Network
WAN side (Internet)
parameters. These settings
are generally not required if
your ISP is providing DHCP
services. In this case these
fi elds can be left blank if
desired.
Host Name - Enter the host
name as desired.
Default Gateway - A default
gateway IP should be assigned
to the AirStation. If unknown,
leave blank. If Auto IP
as sign ment from DHCP Server is selected in the WAN Port section, a gateway IP is assigned
automatically, provided the DHCP server is set to provide one.
DNS Server Address - Enter the primary and secondary DNS address(es) of the server to be used
by the AirStation for DNS resolution.
Remote Management Port Number - Set a specifi c port number when remote setup of the AirSta-
tion is planned. Using port 80 allows the AirStation to be accessed from the internet by connecting
to http://xxx.xxx.xxx.xxx (where xxx.xxx.xxx.xxx is your WAN IP address). You will need to confi g-
ure the NAT (Adress Translation Settings) to forward PORT 80 back to the AirStation.
Block Ping from WAN - Allows a PING test from the WAN/Internet. Select Disable or Enabl
Network of
WAN
Advanced Settings