Pioneer DCS-FS303K - Manual (Page 33)

33 Operation
4
Oper
ation
Starting play from selected
time
DVD DivX
To start playing at any chosen time on the file
or title.
1. Press DISPLAY during playback.
2. Press U u to select the time clock icon and
“--:--:--” appears.
3. Input the required start time in hours,
minutes, and seconds from left to right. If
you enter the wrong numbers, press CLEAR
to remove the numbers you entered. Then
input the correct numbers.
For example, to find a scene at 1 hour, 10
minutes, and 20 seconds, enter “11020” by
using numerical buttons.
4. Press  ENTER to confirm. Playback starts
from the selected time.
Last Scene Memory
DVD
This unit memorizes the last scene from the
last disc that is viewed. The last scene remains
in memory even if you remove the disc from
the player or switch off (Stand-by mode) the
unit. If you load a disc that has the scene
memorized, the scene is automatically recalled.
Changing the character set to
display DivX® subtitle correctly
DivX
If the subtitle does not display properly during
playback press and hold SUBTITLE for about 3
seconds then press
I i or SUBTITLE to select
another language code until the subtitle is
displayed properly and then press  ENTER.
Programmed Playback
ACD MP3 WMA
The programme function enables you to store
your favourite files from any disc or USB device.
A programme can contain 30 tracks/ files.
1. Select the DVD/CD or USB function by
pressing FUNCTION.
2. To add a music(s) on the programmed list,
press PGM/MEM to enter the programmed
edit mode (
E
mark appears on the menu).
3. Select a desired music on the [List] by using
the U u then press  ENTER to add the
music to the programmed list.
4. Select music from the programmed list
then press  ENTER to start programmed
playback.
Erasing a file from Programmed List
1. Use U u to select the track that you wish to
erase from the Programmed list.
2. Press CLEAR.
Erasing the Complete Programmed
List
Use U u I i to select [Clear All] then press 
ENTER.
NOTE
The programs are also cleared when the disc or
USB device is removed, the unit is switched to
power off or the function is switched to others.